Line Marking and dot marking with spray mark heads

REA JET Spray Mark Heads

Spray Mark Technology

Modularly structured REA JET Spray Mark Heads can apply precise dots and lines to porous and non-porous surfaces. With extremely short cycle times of 20 ms, speeds of up to 100 m/min are easily possible. The dot size can be freely adjusted by controlling the material pressure, the notch setting on the spray mark head and the nozzle size used.

Wide area marking (e.g. primers) can be applied using spray mark heads with wide spray heads. Markings can be applied from above, below, and sideways.

Products and Application Gallery

Product details

  • Type REA JET ST SR-1: mid-size model - dot, line and surface-marking for almost all media
  • Type REA JET ST SRM-1: mid-size model - dot, line and surface-marking for abrasive media
  • Type REA JET ST SR-5: small model - dot, line and surface-marking for almost all media
  • Type REA JET ST SR-7: smallest model - dot, line and surface-marking for almost all media
  • Nozzles sizes for different dot size: 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 mm
  • Dot and line marking at a thickness of 3 to 60 mm
  • multi-colored dot and line marking for product type differentiation
  • automated detectable line markings for edge trimming
  • application of location and position markings, as well as "bend here" or "cut here" markings
  • clear product differentiation with just one color using marking patterns (dot, line, combinations)
  • marking hot spots when producing insulation materials
  • targeted application of coolant, cutting media or lubricants
  • application of flux for automatic soldering processes
  • sealing with protective varnish, such as in circuit board production
  • targeted application of adhesives or screw seals
  • wide selection of reliable marking paints and solvents
  • Inks based on alcohol, acetone, or MEK, as well as solvent-based paints and lacquers
  • special paints such as water-based lacquers, UV and fluorescent paints, adhesives based on water or solvents, resins, heat resistant paints and paints for hot surfaces, up to 1000 degrees Celsius
  • approved cleaners are available for each spray mark medium

We would be glad to consult you find a suitable coding and marking solution for your requirements.

Contact us by phone  +49 (0) 6154 638-0 or by contact form.

contact
+49 (0) 6154 - 638 0

You have questions? We would be pleased to call you back.

share